Call for Immediate Service(503) 300-4387

Fixing Low Pressure Showers

Finding Why Your Shower Has Low Pressure

If you start your day with a shower, chances are you’re at least partially relying on it waking you up. You’re not alone. If you don’t want your drain to smell and gunk up, you need proper water pressures to wash it down.

Again, if you suffer from low water pressure, then something in your plumbing is not doing its job properly. The problem doesn’t always have to do with the house and the pipes; in fact, you may be putting up with subpar pressure when a simple equipment swap can take all your headaches away.

Check Your Showerhead

By law, many shower heads are designed to lessen the flow of water in order to deliver only a certain volume of water per minute. This is all well and good, but many times manufacturers may take this a bit too far, because high-restriction showerheads are cheaper to manufacture, resulting in low water pressure. A simple way to counter this is to purchase a new shower head – they’re inexpensive items – and look for the washer inside. This is designed to restrict the water flow, but you can widen this with a drill until the water flows properly.

Pipes Might Be Your Problem

If clearing the showerhead doesn’t work, then the problem may be with your plumbing. A galvanized pipe is one that is coated in molten-zinc, and they are often no longer used in newer homes. This is because over time, they may corrode and cause leakages, which can lead to most of the water escaping before it even gets to your shower. The zinc in the pipe will corrode and rust, falling off the walls of the pipe and blocking the pipe itself. This may lead to water with a faint tinge of copper, as the flow has to pass through mounds of rusted metal.

This isn’t particularly harmful to your health, but it needs fixing, and more importantly, the build-up can block the flow of water. This is a problem that goes much deeper than simple replacement; in fact, if you want your shower back into form, you may need to call in a professional to deal with the pipes. Good thing we’re experienced here at My Plumbing Lake Oswego at dealing with all kinds of plumbing issues.

Plumbing Services In Lake Oswego

Again, rust inside the pipes isn’t especially harmful; you may wish to install tap filters if you plan to drink it, but otherwise, you can keep using water in the same way as you have always been. This is only short-term, however, and you’ll eventually need to have the pipes replaced, especially if your shower is suffering from low-pressure. Different pipes suit different types of houses, with copper being appropriate in some cases and other materials – polyethylene, for example – suiting others.

In any case, there are only a few things that can cause unsatisfactory pressure in a shower. If the problem goes beyond a faulty showerhead, you may need to call in a professional plumber – but at least you can determine the cause of the problem yourself, and know exactly what needs to be done. My Plumbing Lake Oswego has plenty of experienced professionals to handle all your plumbing and drain problems.

Leave a Reply

Your email address will not be published. Required fields are marked *